dissonantstring
Well-known member
i decided to just post a new topic for my recent 1176 Rev.D build (mnats edition).
thank you to mako (mnats) for the board and ed anderson for the output transformer. could not have done this without you guys. the switches were from a group buy organized a long time ago by uberjam. i got the UTC 0-12 for a really good deal from Andy's Garage thanks to CJ and Andy! thank you all! i still haven't put it through it's paces unfortunately, but it works and sounds fine and is calibrated.
front panel
inside
i've built the tangible technologies SL-1176, a G1176 (which I will be convertig to a dual), mnats 1176 Rev.D and trying to finish an MC76. i think that will be all the 1176 type compressors i'll ever need and was only possible with the help of some great people on this forum.:guinness:
thank you to everyone in the LAB for the info on this build. greatly appreciated!
edit: i almost forgot to thank Frank (NRGRecording) for his front panel template designs. i've used quite a bit of his designs and have modified many of my project front panels ! for this Rev.D i pretty much used Frank's 1176 template exactly. :thumb:
-grant
thank you to mako (mnats) for the board and ed anderson for the output transformer. could not have done this without you guys. the switches were from a group buy organized a long time ago by uberjam. i got the UTC 0-12 for a really good deal from Andy's Garage thanks to CJ and Andy! thank you all! i still haven't put it through it's paces unfortunately, but it works and sounds fine and is calibrated.
front panel
inside
i've built the tangible technologies SL-1176, a G1176 (which I will be convertig to a dual), mnats 1176 Rev.D and trying to finish an MC76. i think that will be all the 1176 type compressors i'll ever need and was only possible with the help of some great people on this forum.:guinness:
thank you to everyone in the LAB for the info on this build. greatly appreciated!
edit: i almost forgot to thank Frank (NRGRecording) for his front panel template designs. i've used quite a bit of his designs and have modified many of my project front panels ! for this Rev.D i pretty much used Frank's 1176 template exactly. :thumb:
-grant