APP Studio Ing's products - APP992 - APP14GE Germanium DOA and other kits

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
HI,

can this PSU power the EZ1290 ( 1073 mic preamp ). It needs to see +24V.......OV ......and 48V.
Is this PSU similar to the JLM AC/DC PSU? Does it have a 0V rail?

If all is good, can you tell me your email so I can order one of your PSU kits!

Michael
 
The EZ1290 needs to have 500ma for each mic pre amp
and I have two mic preamps.

I can't find your email address. Hope these PSU's are in stock

regards

Michael
 
AudioHammer said:
Do you have an estimation of when you will begin selling the 2050GE?
Thanks!

I'm waiting the 2050GE pcb's so I think to have a stock avaiable in a month.
I've received one order and I could having other two 2050GE avaiable for the next week.

Pier Paolo 
 
SALSA said:
PSU boards arrived today !
Nice work, also good documentation provided.
Another useful building block for DIY

Thanks,
Mike

thanks
Pier Paolo
 
muffy1975 said:
The EZ1290 needs to have 500ma for each mic pre amp
and I have two mic preamps.

I can't find your email address. Hope these PSU's are in stock

regards

Michael
mail sent
I've in stock only 10 PSU yet.
thanks
regards
Pier Paolo
 
Pier, I Just wanna thank you because your 2050 really rocks !  I've build a FFoptocompressor with those opamp as make up gain, and it sounds rally amazing, big neat sound !

I'have take some measurement with my lindos AL200 sistem, and I've discovered that they show the same distortion spec. expept at 1KHz : 990 has 0.007 and 2050 has 0.01% ( most second harmonic )  @ +6dbU, 

they show the same SN, -92.1 both powered with a common PSU +/-24

apart from this electrical issue, for gain FF opto comp. it is the best choice compared with 990, and 2520. no doubt about it.

I've compared the 2050 with a real API2520, in a 512 Mic pre also, and I have turn it in another  machine, really more clean and versatile tools..

really good Quality Price Ratio also ... It's worth a try !

thank you!

Mik.




 

 
mik said:
I'have take some measurement with my lindos AL200 sistem, and I've discovered that they show the same distortion spec. expept at 1KHz : 990 has 0.007 and 2050 has 0.01% ( most second harmonic )  @ +6dbU,   

Mik.

thank you very much,

it's important to note that APP2050 has a most second-order harmonic distortion, becuse this is the typical tube amp distortion.  Even if APP2050's THD is a tube-like distortion this THD is lower then in a typical tube amp, so the APP2050 THD is very difficult to listen.

Pier Paolo

 
How many amps is your power supply good for? 1 amp 2 amps?

Thanks
 
desol said:
How many amps is your power supply good for? 1 amp 2 amps?

Thanks

I have designed the power supply board for n.4   API312 channels but it can give power to 8 channels.

specs:
positive main out=  600mA
negative main out= 600mA
+48 out = 50 mA



thanks
Pier Paolo


 
APP99F (FET on input) modified , the first version was very good, this second is more good yet.
(I have modified the mirror of the original 990)

Now is in the market, I accept orders with a lead time of around 15 days.  

for the fisrt 10 customers the price is only 26 euros each one, S&H included with priority mail!

 
two APP99F for me please ;D
might fit perfect to a project I'm currently working on ;)

since I'm missing them, will you send me out payment instructions?
 
Hey there,

I have just bought a PSU from your virtual shop for my EZ1290. I gather I will need to change a few of the caps but that this PSU will do the trick.

I will post when I have this PSU up and running and driving my wonderful EZ1290 mic pre amps.

Thanks for your kind and fast emails about the PSU compatibility with the EZ1290 etc

Michael de A

Ciao ;D
 
naths101 said:
Interested in the APP2050 germanium, do you have an ETA?
Cheers

Scuse me but what means ETA ?
tomorrow I will start with the assemblying of APP2050GE.

kind regards
Pier Paolo
 

Latest posts

Back
Top