ATC SCM amp pack calibration procedure

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kosty

Well-known member
Joined
Dec 8, 2009
Messages
114
Location
Vienna, AUSTRIA, EU
I'm soon getting some used ATC amp packs for my passive SCM 50.

I think these are MK1 amp packs and were used with SCM 100.
I know that ATC is servicing and calibrating these but I would like to avoid the expensive shipping to and from UK for these heavy items if possible.

I'm going to recap the amps since the amps are probably quite old and I need to recalibrate these from SCM 100 to SCM 50. Not sure if there is anything to change at all, but I would like to make sure that they are set correctly before connecting my woofers to them.

Does anybody has some information about the calibration procedure ?

I'm going to try to contact ATC, but they were always unresponsive to my emails in the past. I will give them a call if nobody can help me here.

Thanks
 
Back
Top