For Sale Audio Transformers

[KraftWerk]

1166 VT - Matinair Lo1166 Vintage 50 EUR
1166VTX - Marinair Lo1166 Modern 50 EUR
1366 -Marinair LO1366 600-600. 50 EUR
1173 - Marinair1173 from Neve 2254 50 EUR
1802 - T1802 Marinair Cadac and Neve aux ,bus output, 100. Eur
Available stereo sets matched in 0.02 db

 

[SubSpec]

Just wanted to say my order went out super quick and arrived looking every bit as excellent as the pictures! Haven't gotten around to installing but no doubt it'll sound as great as it looks.

 

[KraftWerk]

Just wanted to say my order went out super quick and arrived looking every bit as excellent as the pictures! Haven't gotten around to installing but no doubt it'll sound as great as it looks.

Thank you, please report after test.

 

[Potato Cakes]

Can you provide dimensions for what you currently have available? Interested in trying some of these out for some summing bus and preamp builds.

 

[KraftWerk]

Can you provide dimensions for what you currently have available? Interested in trying some of these out for some summing bus and preamp builds.

Yes, I must do drawings,I will do today.

 

[KrIVIUM2323]

Hi Kraftwerk.
I promised to gives my impressions of 1166VT i got some month ago but like always life in the way ( lost a job, found a new one recently,...).
Anyway i eventually got opportunity to compare them to a Vintech 73 and Sowter 8751. As i still don't have mic input iron i did a 283AM and we drived both unit from converters output ( Antelope).
There was a tiny difference between both but both my friend and i think it comes from the Vintech input transformers, mine was driven direct.
The differences between the 8751 and Vintech were more obvious to us but it could had been bias as the comparison was sighted ( no ABX). In the end we concluded they all sound great but with slight differences.

Anyway i am more than happy and the Vintech owner impressed. Both of us had access to original units when we worked in 'big' commercial studios and we agreed the differences ( if not because of biasing) would have been not worst than between two original.

Great sounding transformers.

OT: Kraftwerk apologize for the delay but what i purposed is still ok and now my situation is stabilised it won't take long to happen.

 

[KraftWerk]

There was a tiny difference between both but both my friend and i think it comes from the Vintech input transformers, mine was driven direct.

yes, input transformer gave noticeable impact on sound.

Anyway i am more than happy and the Vintech owner impressed. Both of us had access to original units when we worked in 'big' commercial studios and we agreed the differences ( if not because of biasing) would have been not worst than between two original.

Yes, I have fiew Lo1166, they are sounding different, some of them with big differences.
I choose one I like and tune my transformers to have that sound.
Now sound of my transformers is repeatable, matched to one each other,

As i still don't have mic input

soon I will have 3 types Inputs , Line, Micro and one input based on steel core.

Great sounding transformers.

Thanks, Im proud of this product, but main goals go to Cj and this forum.

 

[KrIVIUM2323]

You decided to make an input transformers eventually!?
Greeaat!
I want more details!

 

[KraftWerk]

You decided to make an input transformers eventually!?
Greeaat!
I want more details!

https://groupdiy.com/threads/my-vision-of-marinair-t1454.89727/

I already have lams , wire , bobbins , mumetal stripes, tapes , housings comming wery soon, pcb board is on the way , only waiting for brass holders ,bras screws, thea are custom maded, and crazy expensive.
..and I must oder minimum parts for 100 pcs. So, soon I will have 100 pcs.
..and they will not be cheap,i n fact, Im not making it to be cheap, housing is great - rough powder coat black, 2 shilds of mumetal,copper shields, plus 1mm steel, gold plated pins, brass inside...



Tool for winding up to 4 pcs at time, i think nice because i like to match pairs.
one more look inside

 

[KraftWerk]

Can you provide dimensions for what you currently have available? Interested in trying some of these out for some summing bus and preamp builds.

 

[KrIVIUM2323]

My bad Kraftwerk, i was talking about mic input, i had seen your line in thread already! I am interested in a mic input atm.

 

[KraftWerk]

My bad Kraftwerk, i was talking about mic input, i had seen your line in thread already! I am interested in a mic input atm.

Im doing booth, they are very similar, same size laminations, same size box.
One have 80 percent permalloy, another 50 percent permalloy, and different turns number.