Hi, I have a question about a Neve 1272 that is broken. I wired this module up a long time ago, and it was working fine. A few days ago, I decided to wire it up to have more gain (based on Geoff Tanner’s suggestions…27ohm between pin E and F, and 220ohm in series with a 100uF cap between N and E).
Everything was working correctly, but all of a sudden stopped and I have no sound. I ripped off all the mods, but now all I get is a really, really low level signal.
Did I blow the input transformer or something else? Would there still be sound then? For testing the resistors and capacitors, I was using alligator clips, and it was maybe a little clumsily wired together. some wire could have touched another one, and sent DC into pin E (have no idea though…could’ve been something else).
Anyway, I was about to pack it up and ship it off for repair, but wanted to ask you guys if you had any ideas on what it could be. I haven’t had a chance to open it up…I really didn’t feel like doing anything with it because I felt so down that it was probably me being stupid that messed it up.
Thanks!
Everything was working correctly, but all of a sudden stopped and I have no sound. I ripped off all the mods, but now all I get is a really, really low level signal.
Did I blow the input transformer or something else? Would there still be sound then? For testing the resistors and capacitors, I was using alligator clips, and it was maybe a little clumsily wired together. some wire could have touched another one, and sent DC into pin E (have no idea though…could’ve been something else).
Anyway, I was about to pack it up and ship it off for repair, but wanted to ask you guys if you had any ideas on what it could be. I haven’t had a chance to open it up…I really didn’t feel like doing anything with it because I felt so down that it was probably me being stupid that messed it up.
Thanks!