Calrec and 1176 - Dials/Scales - Angles

[Guest]

Has anybody got the angles for the scales for the Calrec EQ and the 1176
http://www.nrgrecording.de/assets/images/calrec_scales_only.jpg
http://www.nrgrecording.de/assets/images/dual1176_frontpanel.jpg

I am having some dry transfers made by a small printing house..

 

[nrgrecording]

Hi.

Do you mean the value how the pot can be turned in degree?

Then:
calrec: 270° (because I used alphastat pots)
dual 1176: 310° (because i used piher pots)

both are (± 5°)
all values were from the catalog - and catalogs and datasheets can be wrong... so:

Rule No.1 for me is: print the panel grafics on a DINa4 paper, stick the pot through the paper, add a knob - and look if everything is correct. :wink:

Or:
Use a triangle from school to look if the angles are correct.

Frank.

 

[Guest]

Thanks Frank
I got the protractor, pencil and paper out
A bit of long division
And it comes out at 27 degrees per large hash mark

The bottom of the Freq and DB knob are 90 degrees apart
That makes it 135 degrees from the vertical...

5 large markings - 27 degrees each