forgotteng
Active member
So I built a CAPI ZCON 11 Clamshell from the kit, which is awesome and I love. To increase my skills I decided to take the new Big Red and build my own enclosure and hand wire it. However I do not have a schematic for it. I'm sure this is a simple circuit but with the ground switch and the impedance switch, I'm hitting a road block. Can anyone point me in the right direction for A schematic? ![20240514_152209.jpg 20240514_152209.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80729-c1a8faf0e66458cc0f4d5a758e92f138.jpg)
![20240514_152219.jpg 20240514_152219.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80730-bfeabefb8cd4dd5e4f7a3ade31925a0e.jpg)
![20240514_152236.jpg 20240514_152236.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80731-013585e3f34d2819fde6548a166528c4.jpg)
![20240514_152245.jpg 20240514_152245.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80732-f64fe30c354936a6f14b1aae4f79a3cb.jpg)
![20240514_152209.jpg 20240514_152209.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80729-c1a8faf0e66458cc0f4d5a758e92f138.jpg)
![20240514_152219.jpg 20240514_152219.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80730-bfeabefb8cd4dd5e4f7a3ade31925a0e.jpg)
![20240514_152236.jpg 20240514_152236.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80731-013585e3f34d2819fde6548a166528c4.jpg)
![20240514_152245.jpg 20240514_152245.jpg](https://cdn.imagearchive.com/groupdiy/data/attachments/80/80732-f64fe30c354936a6f14b1aae4f79a3cb.jpg)