Cleaning a mackie 1604 Vlz

[saxmonster]

What is the best way to clean the 1/4 inputs on the mixer?  I am going to use a clean dry paint brush and an air compressor nozzle to clean the top of the board and blow out the 1/4 inputs but what chemical can i use to clean the contacts in the few that make noise or loose the signal?  Deoxit or some kind of spray like that?

Thanks
-Scott

 

[kante1603]

What is the best way to clean the 1/4 inputs on the mixer?  I am going to use a clean dry paint brush and an air compressor nozzle to clean the top of the board and blow out the 1/4 inputs but what chemical can i use to clean the contacts in the few that make noise or loose the signal?  Deoxit or some kind of spray like that?

Thanks
-Scott

Hi Scott,

try some alkohol like isopropanol with a soft (Q?)-tip,then blow out.

Udo

 

[saxmonster]

Ok, I never thought about that!!!!!!!!!!!!  If it cleans solder dirt I guess it will clean regular dirt, haahahah

 

[kante1603]

Ok, I never thought about that!!!!!!!!!!!!  If it cleans solder dirt I guess it will clean regular dirt, haahahah

YES ;D