imo
Well-known member
Hello,
According to the meta, there is a .438" gap to the left edge of the card. I was hoping to confim this and also see what size standoffs people were using to get "close enough"
I got one of Igor's 500 TG1 kits. He has dropped off of the face of the earth, and the mechanical parts in the kit are not right. I want to make sure that i am able to go straight into the card slot without any flex.
Total width per unti is 1.188, so for a double i would need a total standoff length, all in, or 2.376(minus the width of the aluminum)
Any info on this would be great
Thanks
Ian
According to the meta, there is a .438" gap to the left edge of the card. I was hoping to confim this and also see what size standoffs people were using to get "close enough"
I got one of Igor's 500 TG1 kits. He has dropped off of the face of the earth, and the mechanical parts in the kit are not right. I want to make sure that i am able to go straight into the card slot without any flex.
Total width per unti is 1.188, so for a double i would need a total standoff length, all in, or 2.376(minus the width of the aluminum)
Any info on this would be great
Thanks
Ian