chadblinman
Member
I've been developing a wired desktop remote for the excellent Sound Skulptor MC624 (original thread about that here https://groupdiy.com/index.php?topic=56723.0). Seen here is my version 3 prototype––in cardboard, but fully functional and already in use.
This runs on an Arduino Mega with the Arduinix shield to drive Nixie IN-2 tubes. Commands are transmitted to the MC624 over RS485 serial (via the Link connection).
This is a one-off for myself (not a product) but I'm freely sharing my Arduino code and other design details on Github: https://github.com/chadblinman/MC624_remote
This runs on an Arduino Mega with the Arduinix shield to drive Nixie IN-2 tubes. Commands are transmitted to the MC624 over RS485 serial (via the Link connection).
This is a one-off for myself (not a product) but I'm freely sharing my Arduino code and other design details on Github: https://github.com/chadblinman/MC624_remote