Hi guys this is my 1st post so I hope i'm not asking an obvious question...!
I'm looking for advice from clone builders out there. I was reading that different types of capacitors work better in certain applications (ceramic for filtering and bypass, polystyrene for timing, tuning circuits etc). I am looking into building the GSSL and doing some research and before I jump into buying parts it would be good to know whether I should pay close attention to this or just choose one type of capacitor (obviously with differing values) and run with it.
Any help is appreciated.
Thanks,
JN
I'm looking for advice from clone builders out there. I was reading that different types of capacitors work better in certain applications (ceramic for filtering and bypass, polystyrene for timing, tuning circuits etc). I am looking into building the GSSL and doing some research and before I jump into buying parts it would be good to know whether I should pay close attention to this or just choose one type of capacitor (obviously with differing values) and run with it.
Any help is appreciated.
Thanks,
JN