randytomlinson67
New member
Hi all. Im building a passive 3 Chanel Mixer and when i send a Signal to CH1 Potentiometer for CH1 works fine but if i close Pot CH2 and/or CH3 the Signal of CH1 closes to!!??
How can i prevent this? Pot 2 & 3 should not Affect the Signal on CH1
I have added a Master Pot at the end of the 3 1k Res before going into the Output. thank you
Randy
How can i prevent this? Pot 2 & 3 should not Affect the Signal on CH1
I have added a Master Pot at the end of the 3 1k Res before going into the Output. thank you
Randy