Does anyone here have much experience with any of the available rivets or those snap-off insert things people make for through holes? I'm not interested in anything real elaborate or full toolkits. Probably something more like the little copper rivets with the flange. Wondering which methods work/don't work and what the downsides might be.
Getting from side to side is one of the things I'm not really happy with on my boards, but I've managed some workarounds with via-like things attached to cap legs and stuff I can't solder from the top. It just feels sloppy having wires crossing between sides, plus I don't wish to screw up the cap's job by extending its virtual legs like that.
Thanks,
George
Getting from side to side is one of the things I'm not really happy with on my boards, but I've managed some workarounds with via-like things attached to cap legs and stuff I can't solder from the top. It just feels sloppy having wires crossing between sides, plus I don't wish to screw up the cap's job by extending its virtual legs like that.
Thanks,
George