For Sale DR2402 Summing Mixer

[buckethead]

Hi!

I'm thinking about parting with my DR2402 summing mixer. It never really fit in my workflow so I stopped further working on it a couple of years ago and since then it's just collecting dust.

Asking for 1600€ excl. paypal fees and shipping. This is far from what all those parts did cost, but I'm kinda stepping back from the recording game and maybe someone else will put it to good use - and as I said, it never fit my workflow.

Comes without the PSU!!

In case you're interested, drop me a PM or write me an email: mordpol(at)gmail.com

Best regards,
Mathias

Edit: Had to pull up that old thread. The mixer is still for sale - I lowered the price.

 

[buckethead]

Another pic

 

[fragletrollet]

Hey Mathias! You say "stopped further working on it"; what remains on the build?

If you have time, I'd appreciate your insight in the dr2402 thread in the mixer section. I've finally got mine working but still some tweaks to be done.


Best,
Magnus

 

[buckethead]

Hi Magnus,

I didn't implement the direct outs, I never would have needed them so I left those out. All someone would need to get those going are the balanced THAT drivers and the wiring.

Besides that the PSU is still getting very hot, the DR2402 is pulling around 1A per rail, and supplied PSU is too small. It works, but it's not perfect 

Best regards,
Mathias

 

[fragletrollet]

Any chance you`d be willing to to measure the total gain on the master output with a +4dBu input on a channel, panned L or R, master fader fully open?

8)

 

[lukas]

...if i good remember input = output.

 

[buckethead]

yes it is input = output more or less, -1dbu with pan pot centered, +1dbu with pan pot hard left/right

 

[fragletrollet]

Thanks a bunch! Seems my mixer works correctly then. I'd somehow imagined the booster side of the aca/bo having 12db gain as the ml2/2sla/vp28.

 

[buckethead]

Bumping this old one up

 

[Spiritworks]

Any photos of the rear? Recommendations for the power supply?