Ecoplate II Driver Failure

[Janalex]

Hey all,

Incredibly frustrated. One of my 2 ecoplates went dead. I was sending a line level out of the box to it. Not sure how this happened but the driver is reading very high resistance. I'm moving the send 1/4 inch cable with a signal from one working plate to the other and am not hearing sound coming from the driver. As these are not made anymore what are my options?

Jan

 

[Janalex]

I know the original speaker was MCM Electronics 55-1235. Clear polypropylene woofer with specs below.

Order # Size Watts Watts Response ohm (dB) Coil (A) x (B) x (C) Wt.(oz.) Qts. (cu. ft.) (Hz)

55-1235 61 ⁄2" 40 60 44~8KHz 8 90 1" 5.625" x 6.5" x 2.937" 13 .89 .66 61

Was wondering what the obstacles if any are there to getting another 6.5" woofer such as this.

https://www.newark.com/mcm-audio-se...|&CMP=KNC-GUSA-GEN-Shopping-PMAX-Med-ROAS-S40