First diy project build pics - wire wrap 1073

[wells2p]

Wire wrap scratch built 1073
I asked lots and lots of questions here so big thanks to all especially Ian. Tested from control room tonight with an sm57 micing a small Fender amp in another room and as switched eq on for first time almost shed a tear sounded so good.

The large butcher paper is a complete drawing I did by hand after reading the entire manual lots of times. It helped me to learn and memorize most of it. Next step Eagle cad and hopefully 16 more - will never wire wrap again

 

[MasterEvan07]

That's impressive!

 

[3nity]

True diy.

 

[wells2p]

Wire wrap scratch built 1073
I asked lots and lots of questions here so big thanks to all especially Ian. Tested from control room tonight with an sm57 micing a small Fender amp in another room and as switched eq on for first time almost shed a tear sounded so good.

The large butcher paper is a complete drawing I did by hand after reading the entire manual lots of times. It helped me to learn and memorize most of it. Next step Eagle cad and hopefully 16 more - will never wire wrap again

My diy psu finally took a dirt nap- thinking of buying one. Bae looks ok for the money. Thoughts?

 

[noizetoys]

Why not buy a used 24v linear supply off ebay or somewhere. Cheap and you can use it for any other Neve stuff you want to build.

 

[wells2p]

Why not buy a used 24v linear supply off ebay or somewhere. Cheap and you can use it for any other Neve stuff you want to build.

If that would produce the same results, I am all for that! Besides linear what is the criteria I should be looking for?