Free to a good repair home: Edge terminated capsule (needs a repair)

midwayfair

Well-known member
Joined
Apr 7, 2015
Messages
523
Reaction score
22
Location
Baltimore
I have an edge-terminated capsule (from Studio 939 IIRC) that I slipped while removing one time. One of the membranes has a dent in it that touches the backplate.

It's yours if you want it and can repair it.
 

Lelandletham

Member
Joined
Dec 2, 2019
Messages
8
Reaction score
0
I’m sure it’s far too late, but I’d definitely like this if you happen to still have it. Thanks!
 

midwayfair

Well-known member
Joined
Apr 7, 2015
Messages
523
Reaction score
22
Location
Baltimore
Lelandletham said:
I’m sure it’s far too late, but I’d definitely like this if you happen to still have it. Thanks!

I do actually still have it. PM me if you like.
 

Rob Flinn

Well-known member
Joined
Jun 3, 2004
Messages
4,446
Reaction score
75
Location
Sussex, UK
If the diaphram is mylar you could perhaps try gently heating it.    If you do this with drum heads it removes dents.  Might mess with the tension a bit but what have you got to lose if it needs replacing anyway.
 

midwayfair

Well-known member
Joined
Apr 7, 2015
Messages
523
Reaction score
22
Location
Baltimore
Rob Flinn said:
If the diaphram is mylar you could perhaps try gently heating it.    If you do this with drum heads it removes dents.  Might mess with the tension a bit but what have you got to lose if it needs replacing anyway.

Oh, it's completely buggered.I actually just removed the dented one since I figured it was going to get replaced.
 

Latest posts

Top