elskardio
Well-known member
Hi Guys,
This is a custom talkback rack I built for my studio. It is based around Igor's talkback combiner PCB.
Here's the details:
- 2 stereo mix inputs
- Remote with built-in mic pre, independent talkback illuminated switch for Mix 1, Mix 2 or ALL.
- 4 headphone amps with Mono switch and volume control
- All I/Os on a single DB25 connector
The wiring is a bit messy, but the unit is working perfectly. I recently bought a monitor controller with all talkback functions built-in, so I no longer need this custom rack.
I'm asking $200 USD + Shipping.
Thanks
Gabriel
DB25 I/O (tascam pinout)
CH1 = Mix 1 Left
CH2 = Mix 1 Right
CH3 = Mix 2 Left
CH4 = Mix 2 Right
CH5 = HP Amp 1 (Left +, Right -)
CH6 = HP Amp 2 (Left +, Right -)
CH7 = HP Amp 3 (Left +, Right -)
CH8 = HP Amp 4 (Left +, Right -)
A few pictures:
This is a custom talkback rack I built for my studio. It is based around Igor's talkback combiner PCB.
Here's the details:
- 2 stereo mix inputs
- Remote with built-in mic pre, independent talkback illuminated switch for Mix 1, Mix 2 or ALL.
- 4 headphone amps with Mono switch and volume control
- All I/Os on a single DB25 connector
The wiring is a bit messy, but the unit is working perfectly. I recently bought a monitor controller with all talkback functions built-in, so I no longer need this custom rack.
I'm asking $200 USD + Shipping.
Thanks
Gabriel
DB25 I/O (tascam pinout)
CH1 = Mix 1 Left
CH2 = Mix 1 Right
CH3 = Mix 2 Left
CH4 = Mix 2 Right
CH5 = HP Amp 1 (Left +, Right -)
CH6 = HP Amp 2 (Left +, Right -)
CH7 = HP Amp 3 (Left +, Right -)
CH8 = HP Amp 4 (Left +, Right -)
A few pictures: