steppenwolf
Well-known member
Hi everybody!
Just wanted to post that I found an error on the G7 mic PCB I purchased from gustav. On my board an eyelet near the ground trace touched the trace and shorted a resistor to ground. I scratched it away... I noticed it before putting it together but I think this could cause problems...So please everybody out there with the same board, check, if yours is OK.
Have a nice day!
Stefan
Just wanted to post that I found an error on the G7 mic PCB I purchased from gustav. On my board an eyelet near the ground trace touched the trace and shorted a resistor to ground. I scratched it away... I noticed it before putting it together but I think this could cause problems...So please everybody out there with the same board, check, if yours is OK.
Have a nice day!
Stefan