rafafredd
Well-known member
I´m working on a Gates STA-level and it´s in really good condition. However, for music recording work, I want to implement the so called recovery time MOD. I think it´s a dual pole switch for changing the recovery speed. I don´t have any other info other than what the original manual says...
From the original manual:
And here is the schem:
So, I think that the resistors involved are R36 and R37. Can someone confirm it?
Does anyone knows what were the original values supplied by Gates in this fixed resistor kit mentioned in the manual?
Thanks for reading!
From the original manual:
Recovery Speed: As supplied, STA-Level recovers 2/3 level in 7 seconds and 90% level in about 28 seconds.This is considered typical. However, a kit of small fixed resistors is supplied. If the operator feels this is too slow or too fast, he may, by changing two resistors, increase recovery to as fast as 2/3 level in 2 1/4 seconds and 90% level in 10 seconds, or as slow as 2/3 level in 11 1/4 seconds and 90% level in 45 seconds.
And here is the schem:
So, I think that the resistors involved are R36 and R37. Can someone confirm it?
Does anyone knows what were the original values supplied by Gates in this fixed resistor kit mentioned in the manual?
Thanks for reading!