GssL 20th Anniversary edition

[scott2000]

You bored? Or a better bot? Keeping an eye on you..

/Jakob E.

Just an opinionated coonass...
It's an interesting observation about the comp imo.

 

[desol]

Blend is a switch you turn on? I thought wet/dry blend was always in the circuit?

Also, I was hoping there was gonna be a limit feature added....20:1 for example. Like the Smart C2.

 

[Gustav]

All files up, and everything out of our hands.

Hope someone has fun with it - we sure did!

Isak & Gustav

 

[fragletrollet]

Cool stuff! Awesome work.

What options should one go for if getting it fabbed at JLC?
1.6mm and HASL w/lead unproblematic? What benefit added from say 2mm and ENIG, thicker gold etc...

What to do with vias?

Check box for "2 designs", so panel/switch PCB will be separated from main board?

I acknowledge that this is on the fringe of the scope of this thread, but thought and recommendations are appreciated.

Oh, and where would I tap the side chain to a switch, so I can use external key input for ducking uses?

 

[JMan]

1.6mm with HASL should be fine for this design.

ENIG is an unnecessary extra cost in this case IMO. Lead is only problematic if you live somewhere that has rules about it or are already using lead-free solder, or if you plan to eat it (I mean, lead is obviously problematic in a general sense, but I think you can understand what I mean). Gold plating is useful on something like an edge connector that would need to be wear-resistant, but not needed for this board. From what I can see, the most basic default option from JLC should be just fine.