mulletchuck
Well-known member
howdy. So, one of my ez1073-500s has stopped working on the mic input circuit. The line-input circuits work fine.
Symptoms include: No signal level.
Oscillating click that gets louder if i physically touch the microphone that is connected to the module.
Where do i start for troubleshooting? I disassembled the unit and nothing appeared broken or unsoldered. this unit used to work fine. no caps appeared blown.
Symptoms include: No signal level.
Oscillating click that gets louder if i physically touch the microphone that is connected to the module.
Where do i start for troubleshooting? I disassembled the unit and nothing appeared broken or unsoldered. this unit used to work fine. no caps appeared blown.