ruffrecords
Well-known member
I know there has been lots of discussion about the availability of drop down hinged front panels al la LA2A but looking through all the threads where this has been discussed I did not find a satisfactory or currently available solution
To cut to the chase, I think I have found one. It is made by Schroff and should fit to any DIN sub-rack such as used in the EZ Tube Mixer. It is available from Farnell, part #1371374. Data sheet here:
http://www.farnell.com/datasheets/73369.pdf
Cheers
Ian
To cut to the chase, I think I have found one. It is made by Schroff and should fit to any DIN sub-rack such as used in the EZ Tube Mixer. It is available from Farnell, part #1371374. Data sheet here:
http://www.farnell.com/datasheets/73369.pdf
Cheers
Ian