ruffrecords
Well-known member
I recently purchased this mic from China after it was discussed here. When it arrived I noticed it had a rattle if shaken so I took it apart. As you can see from the attached pic, one of the screws holding the diaphragm has fallen out. Can I just put this back or do I need to do something special to ensure correct tension?
https://drive.google.com/open?id=0B_n67A1hN3qtcDJSNkNpdW1xT0k
Cheers
Ian
https://drive.google.com/open?id=0B_n67A1hN3qtcDJSNkNpdW1xT0k
Cheers
Ian