This was discussed long ago and linked here - check out the third post…
https://gearspace.com/board/geekzone/356482-easy-diy-passive-filter.html
https://gearspace.com/board/geekzone/356482-easy-diy-passive-filter.html
63VDC would probably do. As you say there is no dc there but there is ac (the signal) so the ac rating is important. 40VAC rating is usually sufficient.Ahhh okay I dont know why I couldn't find those but with the part number there it is!
Also I deleted the post you were responding to because I realized what I had drawn up would have the exact opposite effect I was thinking! Thanks for the datasheet!
Would 63VDC be acceptable? I dont think there would be any DC after the output transformer.. is that correct?
Sweet thank you! I found some Wima's that work. They're kind of chunky (11mm wide) but I got them on my board layout no problem!63VDC would probably do. As you say there is no dc there but there is ac (the signal) so the ac rating is important. 40VAC rating is usually sufficient.
Cheers
Ian
Enter your email address to join: