Would this Jensen direct box transformer perform well as a 1:12 mic input for a tube preamp? I read in a 1977 catalog that the primary (12 side) has high inductance, but is the inductance at 20hz on the secondary side likely good enough for linear performance when used in reverse? I remember reading that someone here used this transformer for this exact application; hopefully, one of you active members can give some practical advice.
Thanks!
data: https://www.jensen-transformers.com/wp-content/uploads/2014/08/jt-db-e.pdf
Thanks!
data: https://www.jensen-transformers.com/wp-content/uploads/2014/08/jt-db-e.pdf
Last edited: