• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

JLM 1290 - Neve 1073 Clone ($999 - $1600 new)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hebjam

Active member
Joined
May 3, 2016
Messages
34
This is the JLM 1290 (Neve 1073) mic pre. Made in Australia, (sells for $1999 AUD- $1600 US).  A fantastic sounding unit, one of the very best Neve 1073 clones made, (It has MASSIVE transformers!)  I previously had the Great River ME1NV and BAE DMP, and this unit has more air and a closer to vintage sound than either of those. Also has two great sounding DI's.  The unit is in great condition, (the rack ears have a little bend but not much.)  This is a real bargain for obtaining the true Neve sound.  Comes with US power supply.  Asking  $999.

Website:  https://www.jlmaudio.com/shop/1290-2-channel-mic-p-rack.html

Info:

1290 2 channel mic pre rack. Each channel is our take on the Famous Neve 1073 mic pre with 2 preamp gain stage and output amp module to provide 75dB of gain with ease.
Feature for each channel
Balanced Neutrik Gold XLR in rear panel which is switched to 1meg Fet DI input when jack plugged in.
48v phantom power switch with red LED indicator for rack XLR in.
(All below features work for XLR and DI input.)
Phase switch.
20dB pad switch.
OEP Input transformer.
Output trim pot with -5dB to 0dB range (with pot knob pulled out -90dB to 0dB range).
JLM MIcro 1290 kit with pre built and tested 2 x BAX83NV and 1 x BAX83AM modules.
Huge JLM111DC output transformer.
Balanced Neutrik gold XLR out on rear panel .
 
Back
Top