Klark Teknik KT-2A

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
im having a issue, I purchased the BLA T4b. BARELY compresses, Gain etc is just fine. Did the big CAP mod, tubes, etc. Works fine with the original t4b wondering if there's a pot to adjust the metering when in compression. Or maybe have the signal hit the t4b harder? any ideas?
 
im having a issue, I purchased the BLA T4b. BARELY compresses, Gain etc is just fine. Did the big CAP mod, tubes, etc. Works fine with the original t4b wondering if there's a pot to adjust the metering when in compression. Or maybe have the signal hit the t4b harder? any ideas?
Before I did the mod, I tested the device and it did seem like I had to really push the gain much harder than I had to with an actual LA2A.
After I changed to the Kenetec, I still had to push it just as hard, but the way that it was compressing changed radically.
If there is such a trim pot, I don’t know anything about it, but maybe someone else in here does.
 
Back
Top