Knob cabs for the TL Audio Indigo C-2021

[Voodoosound]

Hello,

I am trying to find some coloured knob cabs for the TL Audio Indigo C-2021 stereo valve compressor.

Does anyone here know what brand and type knobs were used on these?

Thanks,
Paul

 

[sahib]

I had to google some pictures but It looks to me like they are Elma.

 

[Voodoosound]

I had to google some pictures but It looks to me like they are Elma.

I check everything I could find on Elma, they have nothing in this size.

If i measure the inside of the top of the knob it gives me almost 11.3mm.

I need 2 grey and one green cap with line.

I also measured one of the other caps, the outer diameter is 13mm, the inner diameter is around 11.2

The inside of the cap has a number 5 in it.

 

[sahib]

I looked around but could not find anything with that diameter either.

 

[Voodoosound]

For sure it is not Elma, also no Sifam.

 

[scott2000]

This place was referenced in another thread as a possible source for some TL Audio parts?

http://www.audiorelated.com/

 

[Voodoosound]

This place was referenced in another thread as a possible source for some TL Audio parts?

http://www.audiorelated.com/

Correct, they can deliver it for €8,23 each and €12,50 shipment excl. tax. That's €40 in total for 3 knob caps...Kind of expensive.
They will not give any information about what brand knobs are used.

 

[TimG]

For close to 3x€40, you could buy 100 collet knobs with assorted caps, shipped, from Alibaba (to USA)
You could pick the size or color for a full match.

Folks might enjoy your extras.