circuitfreak
Member
- Joined
- Oct 25, 2019
- Messages
- 9
My first post in GDIY. I built an LA2a p2p-I have a problem on V4, (6AQ5a), pin 5-voltage chart suggests I should read 100VDC there, I am getting 197VDC. I do not know enough to know if this can be damaging, but it does seem like it could be an issue. All of my other voltage points read higher than the chart lays out, but this spot is the only spot that exceeds 30% higher...can anyone tell me if this is cause for concern? I've attached a copy of the voltage chart with my readings to the far right...
Thanks for any help!
Thanks for any help!