Looking for these tiny toggles

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

midwayfair

Well-known member
Joined
Apr 7, 2015
Messages
606
Location
Baltimore
I've seen them on other things, but the Monoprice picture was handy and reminded me I was looking for these ...

6008005.jpg


This looks like it's a good "one size smaller" than the usual mountain switch submini toggles I can buy.

I thought someone around here might know what part number it is (I'm in the states, so Mouser or similar) OR they might know if it was just a regular toggle, but recessed to the point where it looks smaller than it is.

Thanks for the help.
 
Those switches, in the mics i've seen so far, are much like the Apem TL3xW0 series, but the Apems have the shaft maybe 1-2mm shorter than the stock chinese(?) ones.

http://www.mouser.fi/ProductDetail/Apem/TL36W000000/?qs=%2fha2pyFadujite1yRSFXq7zkQ8w%252bkPW1uWnRRT64QyJQSBYjMJmotQ%3d%3d
 
Khron said:
Those switches, in the mics i've seen so far, are much like the Apem TL3xW0 series, but the Apems have the shaft maybe 1-2mm shorter than the stock chinese(?) ones.

http://www.mouser.fi/ProductDetail/Apem/TL36W000000/?qs=%2fha2pyFadujite1yRSFXq7zkQ8w%252bkPW1uWnRRT64QyJQSBYjMJmotQ%3d%3d

I know you linked to those before. Maybe I'm getting confused by multiple things in the datasheet, but the measurements make them look to be about the same size as mountain switches. Is it just the bat that's shorter, or is the whole body smaller? Ideally I'd find something where the whole body is smaller.
 
The body itself is the same size, the bat's just a teensy bit shorter than the stock ones, for example in the sE 2200A (of which i have a couple). Same casing size, same pinout & pitch.

I'm afraid i'm not familiar with those mountain switches you mention :)
 

Latest posts

Back
Top