man-bot
Well-known member
- Joined
- Dec 20, 2008
- Messages
- 87
Hi There,
I have been using my Soundcraft console for the last few years and am pretty happy with it - but I always wanted a meter bridge to monitor channel output (it has meters only for busses and master).
I was thinking of building a meter bridge using these: https://youtu.be/4e8EPXXUFCk as they are cheap and I could get the metal work done... it also gives me a more solid shelf above the console to use
Could I just pull the signal from the line outs on each channel? See attached schematic. Just wasn't sure whether it would have any effect on signal.
The other reason I want to do this is so I can mount the phantom switches on the front of the meter bridge... at the moment they are on the back of the board which is a PITA.
Thanks!
Mike
I have been using my Soundcraft console for the last few years and am pretty happy with it - but I always wanted a meter bridge to monitor channel output (it has meters only for busses and master).
I was thinking of building a meter bridge using these: https://youtu.be/4e8EPXXUFCk as they are cheap and I could get the metal work done... it also gives me a more solid shelf above the console to use
Could I just pull the signal from the line outs on each channel? See attached schematic. Just wasn't sure whether it would have any effect on signal.
The other reason I want to do this is so I can mount the phantom switches on the front of the meter bridge... at the moment they are on the back of the board which is a PITA.
Thanks!
Mike