Neumann M49 Clone : Build Thread Puck Style (TLM49 Conversion To M49 b-c)

[Murdock]

Did not change any circuit or components. I specially soldered a wire for testing. only needed to adjust the position of the 7PIN male pin according to the wiring sequence of M49C.

What kind of body is that? Can you please share a picture of the whole mic?

 

[ZHOUJUN]

What kind of body is that? Can you please share a picture of the whole mic?

OK, that’s what the body is like.

 

[donivan]

is there 60mm of interior width for Dan's round pcb

 

[Murdock]

OK, that’s what the body is like.

Thanks! Can I ask, where you got it from and how much it cost?
And was the connector part of it?