New Design 1176 Boards + 900 Power Supply Boards

[Brotastic]

Just received the boards today!!  Thanks Mako!

 

[belac]

I have ran into a problem I am working on a REV A v1.25 and the instructions say to take pads X and Y on the meter board to the X and Y pads on the Main board... only problem is there is no X and Y on the main board, also there is no G pad

 

[regularjohn]

I have ran into a problem I am working on a REV A v1.25 and the instructions say to take pads X and Y on the meter board to the X and Y pads on the Main board... only problem is there is no X and Y on the main board, also there is no G pad

There is a Rev A thread for posting problems with builds here:
http://www.groupdiy.com/index.php?topic=29981.0
This is the ordering thread.
(BTW, your answer to the X and Y can be found by looking at the schematic...always refer to the schematic)
Also, I've built alot of these and have never heard of a G pad.

 

[belac]

I have ran into a problem I am working on a REV A v1.25 and the instructions say to take pads X and Y on the meter board to the X and Y pads on the Main board... only problem is there is no X and Y on the main board, also there is no G pad

There is a Rev A thread for posting problems with builds here:
http://www.groupdiy.com/index.php?topic=29981.0
This is the ordering thread.
(BTW, your answer to the X and Y can be found by looking at the schematic...always refer to the schematic)
Also, I've built alot of these and have never heard of a G pad.

sorry, I am building a stereo version, referencing http://mnats.net/1176-wiring-rotary.html. i'll take a look at that thread

 

[Eliani]

Just payed for 2 FS900+power supply Boards through your Paypall acount...
added a rev A and a rev D 1176 with the power supply boards too!!

 

[mnats]

Just payed for 2 FS900+power supply Boards through your Paypall acount...
added a rev A and a rev D 1176 with the power supply boards too!!

I received your PM. Please refer to the message in the first post of this thread and the message in bold under ordering information on my board sales page.

 

[dr.fire.k]

Hello,
we spoke via email, i ordered 2 Revision D PCB Sets w/ Power back in mid jan and never recieved them.

thanks,
matt firek

 

[mnats]

Hello,
we spoke via email, i ordered 2 Revision D PCB Sets w/ Power back in mid jan and never recieved them.

thanks,
matt firek

Thanks for posting. A replacement set will ship when I return from my trip.

 

[mnats]

All orders received directly by me during my recent break (not through Hairball) will ship today.

***edit - I must have been jet-lagged. Left the boards on the floor at home on the 29th. All boards received during the break shipped yesterday (30th of March 2012).

 

[berkleystudios]

just placed an order for a revD.  first major build cant wait!!!!

 

[WhiteRhino]

Hi there,
Ordered a 1176 rev D "blackface" PCB two days ago, and wondering whether it has been shipped?
The address on the package is:
Jeffrey Hogg
549 Ridout St Unit 305
London Ontario  N6A5N5
Canada

If you have shipped it out that's great, if not I was hoping you could change the shipping address to:
Jeffrey Hogg
295 Skyline Avenue
London Ontario  N5X0A5
Canada

Look forward to hearing back on shipment status,
Thanks,
Jeff

EDIT**  Reading previous posts I've noticed many have mentioned their PCB order included a power supply, is that the case for me??  I ordered the FULL kit from Hairball and never saw an option on a power supply, just assumed it came with the kit...

 

[mnats]

If you have shipped it out that's great, if not I was hoping you could change the shipping address to:

Done.

EDIT**  Reading previous posts I've noticed many have mentioned their PCB order included a power supply, is that the case for me??  I ordered the FULL kit from Hairball and never saw an option on a power supply, just assumed it came with the kit. 

Power supply is part of the main board.

 

[WhiteRhino]

I apologize for the email Mako; didn't mean to offend, thanks for your services!

 

[mnats]

I apologize for the email Mako; didn't mean to offend, thanks for your services!

I was not offended, but remain truly mystified why I receive email so often when the acknowledgements I send ask that any issues or concerns be posted to the forum. There must be something I'm doing wrong 

 

[okgb]

you need something that attaches that message to every post
but you know , sometimes we're desperate  or in a hurry , or insecure

 

[Zac.lister]

Hi mako

You've prob had an email from hairball audio-
I'm the user who had the Hairball site glitch and received the wrong board n kit.  I ordered a rev A but received a rev F.
Been emailing the hairball guys, they've sent me a different transformer and said they've emailed you to arrange a swap and said they'll cover the expense. So should all work out.
Let me know...
Cheers Zac
Boards look great too.

 

[mnats]

Hi mako

You've prob had an email from hairball audio-
I'm the user who had the Hairball site glitch and received the wrong board n kit.  I ordered a rev A but received a rev F.
Been emailing the hairball guys, they've sent me a different transformer and said they've emailed you to arrange a swap and said they'll cover the expense. So should all work out.
Let me know...
Cheers Zac
Boards look great too.

Thanks for posting. I'll fix it up today.

 

[Danny1107]

Hi Mako,

paid for 1176 Rev. A,D, and J Boards on March 18.
Can you tell me when they will arrive or you didn't dispatch yet?

Cheers Danny

 

[mnats]

Hi Mako,

paid for 1176 Rev. A,D, and J Boards on March 18.
Can you tell me when they will arrive or you didn't dispatch yet?

Cheers Danny

Your order was received during my break in March. The boards shipped on the 30th of March per reply #408 above.

I can't predict when they will arrive, but please have a look at the FAQ linked from the first post for more information about shipping times. Hope they arrive soon!

 

[berkleystudios]

just got my revD board in today!!!! first major build! thanks so much! ;D ;D