New design API 525... UPDATE.. METAL IN..PCBs IN

Help Support GroupDIY:

peter purpose

Well-known member
Joined
Jun 3, 2004
Messages
2,082
Location
London
Gents,
I've got a new design 525 that does away with most of the wiring. Only the pots and transformers need to be wired to the pcb.
Provision for a Lundahl 1540, or differential input.
Any interest?

nu525sm.jpg


Biggun.. http://lazpro.com/nu525big.jpg
 

conleycd

Well-known member
Joined
Aug 9, 2007
Messages
213
Hi Peter,

I'm very interested.  I have the first generation ones but I've only stuffed the resistors - so I'd be interested in at least 2 of these updated boards.

Are they available yet?

CC
 

briomusic

Well-known member
Joined
Mar 1, 2009
Messages
411
Location
London/Berlin
this might get me over my grief over the sold out forssell opticals....    ;)

only temporarily though!  8)

q: is this going to be a kit as the old one? after wrangling an iec connector into a cheap and bendy steel case, I promised myself today: the next 3 projects no metalwork .
 

Greg

Well-known member
Joined
Jun 7, 2004
Messages
1,784
Location
New Orleans, LA
I've built one of the 1st generations... use it all the time. I might be interested in a 2nd, but have to think it over. Hope you ditched the attack mod cause it's busted.
 

[silent:arts]

Well-known member
White Market Member
Joined
Jun 4, 2004
Messages
5,145
Location
Berlin, Germany
peter purpose said:
[silent:arts] said:
cool Peter. any chance for a stereo link switch?

Sure... as long as the 120R resistor can be put between a pair of pin6s on your backplane.
this is possible 8):
there are jumpers between each slot to connect pin6 together, no problem to install a resistor there:

stereolink.png
 
Top