Hello
Checking around , and of course "googled" too....
about right method to calculate Pcb Tracks-Paths right Sizes And Thicknesses ...
but not helps found :-[
i know any "conductor" have impedance and absorption...
so I guess the tracks-Paths Sizes And Thicknesses have to be made in the " ideal " size,
to prevent excessive absorption of signal or power ,
and-or tracks that are interrupted because undersized ,
which " good " method of calculating
is required about?
thanks for all helps
peace
R2D2
Checking around , and of course "googled" too....
about right method to calculate Pcb Tracks-Paths right Sizes And Thicknesses ...
but not helps found :-[
i know any "conductor" have impedance and absorption...
so I guess the tracks-Paths Sizes And Thicknesses have to be made in the " ideal " size,
to prevent excessive absorption of signal or power ,
and-or tracks that are interrupted because undersized ,
which " good " method of calculating
is required about?
thanks for all helps
peace
R2D2