geoff004
Well-known member
I had 1 slot left in the 51x rack and needed a headphone amp.
It's inspired by Gustav's head grinder and built mostly off the Jakob/Gyraf schematic.
I've enjoyed building off perf-board. It's like point-to-point in that you can build in 3 dimensions and the PCBs for so many projects are readily available at Radio Shack. Who knew?
Anyhow, sound is great. It makes listening to music enjoyable.
Here's the breakdown - THAT1200 ICs in to TL074s for distribution amps. Then in to 3 sets of the design mentioned above. 3 volume knobs. I haven't used it enough to say how hot it'll get but so far so good.
Pictures:
It's inspired by Gustav's head grinder and built mostly off the Jakob/Gyraf schematic.
I've enjoyed building off perf-board. It's like point-to-point in that you can build in 3 dimensions and the PCBs for so many projects are readily available at Radio Shack. Who knew?
Anyhow, sound is great. It makes listening to music enjoyable.
Here's the breakdown - THAT1200 ICs in to TL074s for distribution amps. Then in to 3 sets of the design mentioned above. 3 volume knobs. I haven't used it enough to say how hot it'll get but so far so good.
Pictures: