Power cord for GEM Model P (italien) Organ

[rock soderstrom]

Hi folks,

I am looking for a power cord for a Galanti made GEM Model P portable organ. This model is very similiar to a Vox Jaguar but the power cord is different, AFAIK. Where can I get one, whats the name of this cable?

I want to keep this organ original. Click photo for animation. Cheers

 

[Gold]

It looks like it could be the same type of connector that you find on older HP400's and older Dolby 361 frames. I don't know the name for it though. I see them on the bay. I may have an extra laying around if you can't find one. Can you measure the pin spacing and diameter? I could check it against what I have.

 

[rock soderstrom]

Thanks for your response, Paul. The power connector on the Dolby device seems smaller.

I will upload the dimensions in a bit.

 

[analogguru]

Looks similar to those of an old electric iron:
https://www.chinahao.com/product/558568760312/

If the diameter of the metal bolts is 4mm you can use banana sockets to create your own jack (with the help of a 3D-printer).

 

[rock soderstrom]

sketch power connector

 

[rock soderstrom]

Looks similar to those of an old electric iron:
https://www.chinahao.com/product/558568760312/

If the diameter of the metal bolts is 4mm you can use banana sockets to create your own jack (with the help of a 3D-printer).

I guess the old electric iron plug is to fat. I got one, somewhere. I will check it.

Yes 4mm, banana sockets plus 3d printer is a good idea and plan B. Thanks.

 

[analogguru]

In the meantime you can use two of those:
https://www.reichelt.de/kupplung-4-mm-bis-2-5mm-schwarz-kun-30-sw-p9611.html?r=1

 

[rock soderstrom]

In the meantime you can use two of those:
https://www.reichelt.de/kupplung-4-mm-bis-2-5mm-schwarz-kun-30-sw-p9611.html?r=1

Yes, they a good for workshop use.  Thanks again.

 

[Whoops]

sketch power connector

I have a spare power cord of an old Frying Pan I will check to see the measurements and let you know, it seems similar to that connector.

You could probably modify one of these power cords by filling the edges

 

[pucho812]

looks to be an Italian cei 23-16 connector  or Italian type c power connector.

 

[rock soderstrom]

Thanks Whoops!

looks to be an Italian cei 23-16 connector  or Italian type c power connector.

Thanks for keywords, I will do a intensive search for them tonight!