Power Transformers to suit Bernbrue's STA-Level PCB's Feeler / Forum input

[Kid Squid]

Hi All,
Just a feeler on Power transformers to suit Bernbrue's STA-Level PCB's -
I'm getting Avel to do a run of Fully encapsulated and potted mains transformers in the style of this -


Multi tapped primaries, interwinding screens and built to NATO spec.

Any interest ?

Best,
Steve

 

[SKJGProject]

depending on price i'm in for one!

 

[nickhepfer]

depending on price i'm in for one!

same here

I'm in for two!

 

[kosi]

also interested !
to be clear: are the transformers  included ? where do you get them ?
Or just the cases ?


thanks,
Andreas

 

[SKJGProject]

just read the thread title carefully....

 

[Purup]

Interested in 2 depending on price.
Please provide us with the specs.

 

[Kid Squid]

Chaps,
Been to see my transformer guy this afternoon, and things are good. I should have a unit back within the next week with prices.
The only difference to the pic i posted is that the grey hammered finish cans are no longer available - the steel cans are now a black finish.

Specs are as follows

Dual Primaries - 100,110,115,120V
Electrostatic screen
Sec 1 - 300v @ 250mA
Sec 2 - 9V @ 4A
Sec 3 - 5V @ 1A

Potted into Steel can 1.5mm, 4x M4 fixings, and leads exiting out of fixing face.

Best,
Steve

 

[Kid Squid]

Hi Chaps, Some pics of the Power transformers to suit the Sta level type case





Best,
Steve

 

[Winetree]

I'm in for 2 transformers.

 

[gareth33]

I'm ready to build any day, whats the lead time on the transformers? I'm in for 1. Thanks!

 

[ChrioN]

In for 2 but price dependent

 

[punk]

i'll take one.

byron

 

[Kid Squid]

Hi Chaps,
I've got a lead time of two weeks on these beauts, I've tried to get the price down as much as possible, but the lowest I can get them made for is £90 each. A bit more expensive than the normal un-canned type, but more than worth it.
Sorry if I havent been back in touch sooner, but work is full on at the moment. However, I am going ahead with this style so, if any of you chaps want in, let me know !

Best,
Steve

 

[vineyardgray]

PM'd

 

[Kid Squid]

Hi Chaps,

Sorry for the delay - I've been covering 12 hour shifts at work the last six weeks. 72+ hours a week !!
I'll be putting a list up the next few days for the first order, so no worries, I'm on the case.

Best,
Steve

 

[Le Roux]

I'm in for one, maybe two depending on cost of the cases.

I'll update both posts once a list is created.

I'm in for Two Please!

Thanks
Neil

 

[CBR]

Hey! I'd like 2 of these.
Cheers, daniel

 

[Jeremy.Starseed]

Interested in 1, if suitable for use with 220/230V european voltage...same as in Oz, isn't it?

 

[core13]

interested too

 

[Kid Squid]

Chaps,
I havent forgotten about the transformers Cases Etc, I will shortly be putting up a request list to finalise the total amount I need to order.

Best,
Steve