Samuel Groner
Well-known member
Hi
Could someone have a look @ my first PCB design?
[removed]
It's for a headphone amp, supplies three 5532 and two OPA 551. Mains transformer is 2x30 VAC, 15 VA.
Tracks are 20, 30, 40 or 50 mils wide. Is it OK to jump between these width as I did?
Would it be good practice to add some ground planes between the tracks?
Thanks for your help!
Samuel
Could someone have a look @ my first PCB design?
[removed]
It's for a headphone amp, supplies three 5532 and two OPA 551. Mains transformer is 2x30 VAC, 15 VA.
Tracks are 20, 30, 40 or 50 mils wide. Is it OK to jump between these width as I did?
Would it be good practice to add some ground planes between the tracks?
Thanks for your help!
Samuel