user 37518
Well-known member
Ok so i want to recap my MCI JH-500 C series desk, i will be using Panasonic FM and FC since i cant find FM's in all the measures. But my question is this: Since FM's have lower impedance than FC's, should i use FC on input stages and FM on output stages to keep the high impedance on the imput and low impedance on the output?.
For example:
My built-in preamps have a 470 uf cap in the input, and 2200uf/50v on the output, i cant find the 2200uf cap on FM series only the 470uf, so is there a problem if i use FM in the 470 uf (input) and FC on the 2200uf cap (output) or will ill have any impedance issues?
Thanks
For example:
My built-in preamps have a 470 uf cap in the input, and 2200uf/50v on the output, i cant find the 2200uf cap on FM series only the 470uf, so is there a problem if i use FM in the 470 uf (input) and FC on the 2200uf cap (output) or will ill have any impedance issues?
Thanks