Analogique
Active member
- Joined
- Feb 1, 2005
- Messages
- 28
I noticed several ways of driving the primary of hi-fi transformers: cathode/emitter AC coupled, op-amp single-ended (API/ADM mic pres), differential push-pull (Tube-Tech MP1A) and Lundahl referenced Mixed Feedback, to name a few ...
Aside from signal and loading level differences, I'm wondering if there is one approach that is generally favoured over another on a Transient Response basis ?
I'm trying to understand how to best approach adding DI to my Bass preamp ... I'm thinking of converting the final emitter follower to a cathodyne type circuit and using a separate push-pull drive circuit ... I have 24v of supply headroom, so a cascoded pair would likely fit ... what balanced-input DI transformer is well suited for this ?!
thx!
Aside from signal and loading level differences, I'm wondering if there is one approach that is generally favoured over another on a Transient Response basis ?
I'm trying to understand how to best approach adding DI to my Bass preamp ... I'm thinking of converting the final emitter follower to a cathodyne type circuit and using a separate push-pull drive circuit ... I have 24v of supply headroom, so a cascoded pair would likely fit ... what balanced-input DI transformer is well suited for this ?!
thx!
