ChrioN
Well-known member
I don't know what a standard size membrane is able to capture,
but I bet there is usually some form of high pass filter in the membrane signal preamplifier.
Here is the schematic for the NT1a:
http://techie007.3utilities.com/resources/groupdiy/Rode%20NT1-A%20schematic.png
Any suggestions on a modification to extend the low end? Down to 1hz would be nice.
but I bet there is usually some form of high pass filter in the membrane signal preamplifier.
Here is the schematic for the NT1a:
http://techie007.3utilities.com/resources/groupdiy/Rode%20NT1-A%20schematic.png
Any suggestions on a modification to extend the low end? Down to 1hz would be nice.