MidnightArrakis
Well-known member
[I have started a thread for it in the Machine Shop forum] -- What is this new thread called? How do I find it? Where is it located?
/
Reddish 500 EQ
- Thread starter JMan
- Start date
Help Support GroupDIY Audio Forum:
/
capacitorless
Well-known member
Seriously - you can't be bothered to navigate to the Machine Shop forum yourself and check the top?
"/" indeed.
"/" indeed.
For future readers who might run across this discussion at a point in time when Ian's thread is - perhaps - no longer at the top of the Machine Shop forum, here's a link.
Forcemusicgroup
Well-known member
- Joined
- Sep 12, 2019
- Messages
- 98
Just completed this build. I purchased a set. I was able to get one running flawlessly however, the second one.... nothing. Passes signal in bypass but when active, I get nothing. I hear the relays going off. Can someone lead me through where to troubleshoot? I appreciate it. I haven't not tested voltages as I'm getting nothing to start. Any help would be great.
Testing voltages would be the place to start.
If voltages are good, the next thing I'd try is switching it to a different slot in your rack to see if that is the culprit.
These steps help us rule out the obvious (yet easy to overlook) variables. You'll want to do that first before we go hunting in the circuit.
The good news is that you have one unit running, so we have something to compare it to. Please report back once you've done the two checks above, and if the problem persists, we'll move on to troubleshooting the circuit.
If voltages are good, the next thing I'd try is switching it to a different slot in your rack to see if that is the culprit.
These steps help us rule out the obvious (yet easy to overlook) variables. You'll want to do that first before we go hunting in the circuit.
The good news is that you have one unit running, so we have something to compare it to. Please report back once you've done the two checks above, and if the problem persists, we'll move on to troubleshooting the circuit.
