Hey guys,
Quick question for those who know a lot about opamps.
I'm in the middle of re-chipping my Tascam M-3700 console. I've come to the master section which I have decided to replace all the JRC 4580D chips with OPA2132. Along the was, I have noticed that two of the 16 chips in the master section are JRC 386D as opposed to the 4580D I have found throughout the rest of the console.
Should I continue to replace the 386D with OPA2312 or are they not interchangeable? Here's a link to the schematic. I don't have a scanner at home so I took a photo of it. It turned out pretty good, you can see everything clearly.
http://img593.imageshack.us/img593/8444/masterc.jpg
If the OPA2132 isn't suitable, can someone recommend a better replacement or is the 386D a good chip?
Thanks,
Kris
Quick question for those who know a lot about opamps.
I'm in the middle of re-chipping my Tascam M-3700 console. I've come to the master section which I have decided to replace all the JRC 4580D chips with OPA2132. Along the was, I have noticed that two of the 16 chips in the master section are JRC 386D as opposed to the 4580D I have found throughout the rest of the console.
Should I continue to replace the 386D with OPA2312 or are they not interchangeable? Here's a link to the schematic. I don't have a scanner at home so I took a photo of it. It turned out pretty good, you can see everything clearly.
http://img593.imageshack.us/img593/8444/masterc.jpg
If the OPA2132 isn't suitable, can someone recommend a better replacement or is the 386D a good chip?
Thanks,
Kris