samgraysound
Well-known member
Hi All,
I'm trying to find some replacement switches for a moog prodigy I'm working on. A couple of the switches were really rusted out, and even after I've cleaned them up just aren't working smoothly. Also on one, the tabs that hold the phenolic wafer to the chassis have broken off and I've had to glue it together.
As far as I can tell, all of mouser's switches are way too small. Can anyone point me towards a source for these old switches? I'm looking for one dpdt and one dp3t
Attached is a picture. They say Vio on them. The one in the picture has 980-041752-001.
I'm trying to find some replacement switches for a moog prodigy I'm working on. A couple of the switches were really rusted out, and even after I've cleaned them up just aren't working smoothly. Also on one, the tabs that hold the phenolic wafer to the chassis have broken off and I've had to glue it together.
As far as I can tell, all of mouser's switches are way too small. Can anyone point me towards a source for these old switches? I'm looking for one dpdt and one dp3t
Attached is a picture. They say Vio on them. The one in the picture has 980-041752-001.
Well, if you've got surgeon hands you may be able to rebuild them (minus the tabs). As long as the internal parts of the switch arnt as rusted out as the outsides. I once had to perform surgery on a Control Room Monitor pot on an Oram console cause they used a special order pot and I could find a source that would sell me just one haha. Ended us working great though! But wasn't fun at all. I'll keep looking to see if I can find anything.
