Greg S. said:the LM317, LM337 Resistors
gt_jumper said:Can i use n4007 in the place of Z10? I have a large bag of N4007s.
gt_jumper said:Thanks for the answer.
This should do the trick yes?
http://au.rs-online.com/web/p/zener-diodes/0812465/
Nick Franklin said:Just finished mine up. No dramas at all. Pleasure to build, thanks Gustav! Sounds excellent. I've owned a number of 1178's in my life and this is definitely made of the same stuff
Here's a couple of pics:
Gustav said:Thanks G!
I used an NE5566!
Nick.
Nick Franklin said:Just finished mine up. No dramas at all. Pleasure to build, thanks Gustav! Sounds excellent. I've owned a number of 1178's in my life and this is definitely made of the same stuff
Here's a couple of pics:
That build is insanely good looking...
What did you use for the FET?
Gustav
mike76 said:Hello Jakob,
it doesn't matter at which settings. After calibration as Gustav describes it on the Website for the 1176, I have a really good stereo tracking. As soon as I change the threshhold via input, the imbalance appears.
I recently realized, that I used 20% tolerance trimmer for the qbias. May this could be the source of evil? Thanks!
There is no/nada/niente zener diode in the 1178 (IIRC the Urei house numbers Y10 were 1N914 or 1N4148).Gustav said:(I took the 1178 direct from schematic, ...
Enter your email address to join: