S800 Support Thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Would an  +-24V 0.6A Power One supply adjusted down to +-18V be suitable for powering 2 channels of S800 EQ and 4 channels of W492 EQ? (the W492 has opamps rated for higher voltage).

Thanks,
Craig
 
audio maintenance sell full kits with all components at very reasonable price
http://www.audiomaintenance.com/acatalog/kits.html
 
PeterC cant seem to PM you.
Apparently your box is full?
Does this meen you dont
have any PCB's left over for me?

-Frans
 
I've never been able to get the LMF of one of my two channels to work.  Everything else is fine with that channel, but when I boost or cut the gain know nothing happens.  I've checked for bad soldering, and am to the point were I'll have to pull each component out of this section to see where the problem is.  Is there one part that would completely stop this section from working? 

Thanks,
Craig
 
Back
Top