SAM 82 mixer

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Wanted to check in to see if anyone has managed to source the correct 96pin DIN connector to match the Sam 82?

I know its out there but there are too many to attempt to try!
 
Hi there
In case anyone's looking or needs another SAM for parts. I have a SAM 82 I'm selling. Everything works well except the first channel which is silent (looking through this thread it seems to be a common problem!)
Everything else working well and has the original smoked perspex lid -with a small chip & a small crack. Before anyone asks...unfortunately, I do not have the breakout box. The Serial no.is 1611.
I'm in the Uk but can ship - these consoles are very heavy though. I am open to reasonable offers - this is not a spares/repair console - it is in fully working condition (apart from channel 1) and cosmetically very good.
It was fully serviced about 2 years ago by the head technician at Ferber Studios (The closest thing Paris has to Abbey Rd) He didn't attempt to repair ch1. He re-calibrated the VUs & did a general service.
Duncan
 

Attachments

  • IMG_1393.JPG
    IMG_1393.JPG
    3.2 MB
  • IMG_1392.JPG
    IMG_1392.JPG
    2.2 MB
Last edited:
Back
Top