LevinGuitar
Well-known member
- Joined
- Jun 13, 2019
- Messages
- 410
Quite similar to the TBone SCT700 in circuit and probably parts (capsule, tube and transformer) but still different. The PSU is also a bit different, providing retarded anode voltage (until the heater reaches it's max voltage), and have a separate voltage for capsule polarization. There are a bit of psu noise in the signal, so the filtering is not optimal. The psu have vents in both sides, that is quite nice, but this allows a lot of dirt to enter inside.
Edit: schematic updated with pads. The low cut is a bit unusual for this mics.
Edit: schematic updated with pads. The low cut is a bit unusual for this mics.
Attachments
Last edited: